Skip to main content

Download

PROFINET Test Bundle

PROFINET

Description:

The PROFINET Test Bundle supports the development of PROFINET interfaces for field devices and controllers. It can be used as a means for preparation of the mandatory certification for PROFINET devices.

This bundle contains
RT-Tester (ART),
IRT-Tester (SPIRTA),
TEDCheck,
Security Level 1 Tester,
Test Specification PN devices,
PN Specification,
all PN relevant Guidelines,
Test cases for all RT-/IRT-/Security Level 1- tests,
GSDML specification and
GSD-Checker.

The goal of this test system is to have all the necessary documents and test systems for RT and IRT and Security Level 1 (NetLoad) combined in one bundle with all the electronic test cases to be performed during a certification test.

_____________________________________________________________________

 

 

Version 2022-07-28 (V2.43.1)

This Test Bundle V2.43.1 Release shall be used for certification test of a device and/or a controller of Conformance Classes A and B and a device of Conformance Class C.

Conformance Class D is in preparation. Additionally to the current test bundle, which contains mainly the new version of the ART with automated controller tests and automated evaluation of MRP tests for devices, a separate bundle with the pilot version for PROFINET with TSN and PA 4.0 is available. This allows developers to gain early experience with the new system and PROFINET with TSN or PA 4.0 profile devices. You will find the pilot version here: 

PROFINET TRIAL Test Bundle (including ETS, TSN and PA)

 

temp_accepted_behavior document

This document describes the situation about special behaviors of some devices that are accepted in an interim period and are not accepted in later versions any more. This document may be updated when new such behaviors are detected or tests are updated.


_____________________________________________________________________________________________________________

Expected timelines for test bundles

 

BOT (Begin Of Test)  V2.42:         July 30, 2021

EOT (End Of Test)     V2.42:         September 30, 2022*
 

BOT (Begin Of Test)  V2.43:         August 17, 2022

EOT (End Of Test)     V2.43:         August 31, 2023*
 

* Expected, but not yet decided! Shifts in planning and timeline will be communicated here

______________________________________________________________________________________________________________

The Readme of the PROFINET Test Bundle is downloadable for everyone here:

Readme of PROFINET Test Bundle


For support or feedback, please contact PN-TS-Support(at)oth-aw(dot)de

Files:
This area is for members only. Please login to access this download.
# Date Filename Type Size
03/08/2021 2021-07-29_PN-Test_V242.zip zip 432 MB
17/08/2022 2022-07-28_PN-Test_V2431.zip zip 829 MB
17/08/2022 temp_accepted_behavior.pdf pdf 122 KB

Our well-known PI technologies

PROFIBUS


PROFIBUS is a standardized, open, digital communications system for all areas of application in manufacturing and process automation.

PROFINET


PROFINET is the innovative open standard for Industrial Ethernet. It satisfies all requirements of automation technology.


IO-LINK is an independent sensor / actuator interface solution for use with all automation technologies.

omlox

 

Omlox is an open technology standard for real-time indoor localization systems for industrial manufacturing.