Skip to main content

Manufacturers Declaration for PROFINET Cabling



For an easy and reliable PROFINET installation a component approach for passive network components has been standardised in the IEC 61784-5-3. The requirement for this approach is, that the passive components fulfil the PROFINET Guideline "PROFINET Interconnection Technology".

For PROFINET passive components the conformity shall be declared by the manufacturer of the product. The declaration form can be downloaded by all PI members from the PI homepage.

The manufacturer shall fill in the product data in this form and send it to:

PROFIBUS Nutzerorganisation e.V. (PNO)
Haid-und-Neu-Str. 7
76131 Karlsruhe

or to: certification[at]

For more than 7 components please use the attached table in addition to the declaration.


A registration number will be issued and sent to the manufacturer.


The PROFINET logo may only be used for passive network components with PI registration number.  The PROFINET logo shall not be used for passive network components without a PI registration number.

# Date Filename Type Size
06/11/2017 zip 40 KB

Our well-known PI technologies


PROFIBUS is a standardized, open, digital communications system for all areas of application in manufacturing and process automation.


PROFINET is the innovative open standard for Industrial Ethernet. It satisfies all requirements of automation technology.

IO-LINK is an independent sensor / actuator interface solution for use with all automation technologies.