Training Centers
PI Training Centers (PITCs) support developers and users in learning about and using PROFIBUS and PROFINET. They deliver formalized educational sessions aimed at raising the knowledge levels of engineers in several important areas of PROFIBUS and PROFINET.
PITCs deliver a variety of training classes and in different ways. However, all operate to a consistent standard that is audited by PI to ensure a standard quality of performance.
PROFItech: PROFItech is a description for classes delivered to engineers seeking certified engineer status in the world of PROFIBUS and PROFINET. There are currently two types of PROFItech classes:
- Certified Network Engineer for PROFIBUS and separately for PROFINET. Both involve an intensive one-week course.
- Certified Installer classes. A one-day class.
Engineers successfully passing tests or exams at the end of such classes are awarded certified engineer or installer status. Names of successful engineers and installers are published on this and other web sites in the PI Community.
Here's a list of the PITCs currently operating worldwide:
Open filters
Close filters
Search narrowed by
Active selection
-
ACRO
Geert Leen
Wetenschapspark 27
3590 Diepenbeek
Belgium
Phone: +32(0)11/27 88 18
Fax: +32(0)11/27 88 21
Email: support(at)acro(dot)be
Web: www.acro.be
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
ACRO is a Research and project Group from the UCLL graduate school in the field of the automation and is certified PROFIBUS COMPETENCE CENTER.
ACRO services :
- Training about PLC, industrial networks (PROFIBUS, PROFINET), visualization
- Trouble shouting about PROFIBUS and PROFINET on site
- Control of new installations about PROFIBUS and PROFINET
- Projects about Industrial automation
- Building automation
-
Adeptor AS
Kai Atle Myrvang
Olav Helsets vei 5
0694 OSLO
Norway
Phone: +47 55 59 69 90
Fax: None
Email: kai-atle.myrvang(at)adeptor(dot)no
Web: www.adeptor.no
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
-
AGILiCOM
Frederic Bahuaud
1 rue de la Briaudière
37510 Ballan-Miré
France
Phone: +33 (0)2 47 76 10 20
Fax: +33 (0)2 47 37 95 54
Email: f.bahuaud(at)agilicom(dot)fr
Web: www.agilicom.fr
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
The services we offer are:
- Onsite audits and troubleshooting (PROFIBUS, PROFINET, industrial ETHERNET, WiFi networks)
- Industrial communication products (switches, gateways, repeaters, cables, connectors, diagnostic tools, wifi)
-
ASM Process Automation
Ali Magboul
Al Ghaya St. Al Khalidiah Dist. Villa No.6 P.O. Box 51736
21553 Jeddah
Saudi Arabia
Phone: +966 555918537
Fax: +966 26828943
Email: a.magboul(at)asm(dot)net
Web: http://asm.net
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
Availability of two Training Kits with a Master and five different PROFIBUS Modules. Certified Trainings will be held in Public venues such as hotels.
-
ATS Applied Tech Systems B.V.
Nico Hanemaayer
Korenstraat 33
7722 RS Dalfsen
Netherlands
Phone: +31 529 438310
Fax: +31 529 438319
Email: Nico.Hanemaayer(at)ats-global(dot)com
Web: www.ats-global.com
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
It’s not always easy to solve issues concerning industrial communication protocols and media. Should I use PROFIBUS or PROFINET? Why can’t system components from different suppliers communicate with each other? Where do the faults occur on my network? And how do I optimize my industrial network to our wishes for the future?
As an end user it can take a lot of time to fully investigate all possibilities and solutions. In order to help you with this, ATS has established the "Center of Expertise in Industrial Communication" (CoE-IC). As part of the CoE-IC, ATS is accredited PROFIBUS / PROFINET International Competence Center (PICC).
The goal of the CoE-IC is to centralize our expertise in industrial communication and related system knowledge. This allows ATS, as an independent solution provider, to share this knowledge efficiently with end users. Not only our knowledge at component level is important, but our knowledge and experience with multiple automation platforms, communication protocols and production processes in various industries are indispensable.
The ATS CoE-IC supports you with the several services. A free telephone advice helps you right away in most cases. If you need more help, one of our engineers can offer you support on location. We use a standard support rate for this. More examples of our services are trouble shooting, design support, support during commissioning, independent consultancy and certification of networks. You are also welcome to follow an official PI training course yourself at ATS Applied Tech Systems. -
Autex S.A.
Hernán Bertotto
Agapito Albert 155 - Mz 053 - Lote 10 - PILT
X5900 Villa Maria
Argentina
Phone: +54 353 510 0614
Email: training(at)autex-open(dot)com
Web: www.autex-open.com
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
AUTEXOPEN is a company with more than 10 years in the automation market and as a first training and competence center in Argentina want to share our knowledge and expertise in fields networks and we want to bring to the companies and people who need to develop, improve or maintain their communication networks the best practices and tools to achieve this.
From our company we are leading the digitization of production processes
"WE TAKE ON YOUR CHALLENGES AS OURS"
-
BOORST Engineering
Damien Berton
Hermann-Wehrle Strasse 16
67433 Neustadt a.d.W.
Germany
Phone: +49 6321 9520450
Email: damien.berton(at)boorst(dot)com
Web: www.boorst.com
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
-
C.S.M.T. Gestione S.c.a.r.l.
Pierfederico Cancarini
Via Branza 45
25123 Brescia
Italy
Phone: +39 030 6595111
Fax: +39 030 6595000
Email: profilab(at)csmt(dot)it
Web: www.csmt.it
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
CSMT Gestione Scarl in synergy with the University of Brescia became the PICC (PROFIBUS and PROFINET International) in PROFIBUS and PROFINET technologies in 2004.
CSMT Gestione Scarl is also a Training Centre (PITC) accredited by PI since 2007 and can provide certified quality training on PROFIBUS and PROFINET technologies.
-
Control Specialists Ltd
Peter Thomas
9, Westbury Close
WA1 4JU Warrington
United Kingdom
Phone: +44 (0) 1925 824003
Fax: +44 (0) 1925 824004
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
Control Specialists Ltd are an organisation with over 30 years of practical experience in the design and support of industrial automation control systems and the communication networks used by them. We can be contacted on +44(0)1925 824003 or via our web site www.controlspecialists.co.uk
PROFIBUS and PROFINET Training Centre (PITC)
In our role as a PROFIBUS and PROFINET Training Centre (PITC) we can provide the following PI Certified Courses at your premises or on a scheduled basis in Manchester: -
· Certified PROFIBUS Installer (1 day)
· Certified PROFIBUS Engineer (3.5 days)
· Certified PROFIBUS System Designer (2.5 days)
· Certified PROFINET Installer (1 day)
· Certified PROFINET Engineer (3.5 days)
We also provide the following courses in an online / instructor-led format or at your premises.· PROFIBUS Commissioning and Maintenance (1 day)
· PROFINET Commissioning and Maintenance (1 day)
· AS-I Commissioning and Maintenance (1 day)
· CANOPEN Commissioning and Maintenance (1 day)
· EMC Awareness for Industrial Automation Systems (1 day)
· PID Loop Optimisation (1 day)
Peter Thomas of Control Specialists Ltd is the Chairman of the PROFIBUS and PROFINET International Training Centres Working Group who are responsible for defining the learning outcomes of PI Certified Training courses and ensuring global quality of course delivery.
-
CTU in Prague
Pavel Burget
Karlovo nam. 13
121 35 Prague 2
Czech Republic
Phone: +420 224 357 610
Fax: +420 224 357 610
Email: Pavel.Burget(at)cvut(dot)cz
Web: www.dce.fel.cvut.cz
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
Available Experts:
- Pav
el Burget
- Ondrej Fiala
-
Endress+Hauser Process Solutions AG
Michael Ulrich
Christoph Merian Ring 12
4153 Reinach
Switzerland
Phone: + 41 61 715 73 61
Fax: + 41 61 715 73 01
Email: michael.ulrich(at)solutions.endress(dot)com
Web: www.endress.com
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
Endress+Hauser Process Solutions bietet verschiedene Kurse zum Thema PROFIBUS an. Abstufungen im Detailierungsgrad nach Basic, Advanced und Professional bieten das massgeschneiderte Training fuer verschiedene Vorkenntnisse der Teilnehmer.
Weiterhin werden kundenspezifische Trainings nach Absprache angeboten.
Endress+Hauser Process Solutions offers different training possibilities for PROFIBUS. Trainings as Basic, Advanced and Professional ensures that the participants with different knowledge levels can participate.
Additional tailor made trainings for customers can be done by request. -
Genoa Fieldbus Competence Centre s.r.l.
Alberto Sibono
Via Greto di Cornigliano 6R/38
16152 Genova
Italy
Phone: +39 010 86 02 580
Fax: +39 010 65 63 233
Email: alberto.sibono(at)gfcc(dot)it
Web: www.gfccitaly.com
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
-
IDX Industrial Data Xchange
Bruce Bean
1 Weaver Street, Fourways
2055 Johannesburg
South Africa
Phone: +27 11 548 9960
Fax: +27 11 465 88 90
Email: bruceb(at)idx.co(dot)za
Web: www.idx.co.za
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
IDX operates the PROFIBUS and PROFINET Competence Centre of Southern Africa which is resposible for running PROFIBUS & PROFINET Internationals Certified PROFItech courses in Southern Africa.
Training takes place at a number of venues around the country. For more infomation contact the PICC. -
Inatel - Instituto Nacional de Telecomunicacoes
Alexandre Baratella Lugli
Joao de Carmargo Avenue, 510 - Inatel
37540-000 Santa Rita do Sapucai - MG
Brazil
Phone: +55 (35) 3471 9262
Fax: +55 (35) 3471 9314
Email: baratella(at)inatel(dot)br
Web: www.inatel.br
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
-
Indu-Sol GmbH
Stephan Fischer
Blumenstraße 3
04626 Schmölln
Germany
Phone: +49 34491 580-0
Fax: +49 34491 580-499
Email: fischer(at)indu-sol(dot)com
Web: www.indu-sol.com
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
Indu-Sol GmbH provides solutions that ensure industrial automation systems running the fieldbus- and industrial Ethernet technology function properly. Our mission is the objective evaluation of the quality of industrial data communication. In order to ensure the continuous functioning of automated systems we developed a complete system solution for Permanent Network Monitoring (PNM) with the goal of sending a warning before a system is down. As a key partner in practical application, we also support our customers in all areas from planning and commissioning to maintenance and troubleshooting in a variety of networks such as PROFIBUS, PROFINET, CAN, ASi and many more. Furthermore, Indu-Sol has been busy transferring all of its knowledge to its customers world-wide using seminars, metrological measurements, technical support and webinars.
-
Instrumentation Technology & Economy Institution
Jiang Haoran
Guanganmenwai
100055 Beijing
China
Phone: +86 10 6328 0851
Fax: +86 10 6326 2680
Email: jianghr(at)itei(dot)cn
Web: pi-china.org.cn
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
-
INTEX Sp. z o.o.
Pietro Zappa
ul. Portowa 4
44- 102 Gliwice
Poland
Phone: 0048 32 2307516
Fax: 0048 32 2307517
Email: intex(at)intex.com(dot)pl
Web: www.intex.com.pl
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
-
JCOM Automation Inc.
James Powell
1115 Whitefield Dr.
K9J-7P4 Peterborough, Ontario
Canada
Phone: +1 705 868-8745
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
JCOM Automation Inc. is Canada’s PROFIBUS and PROFINET experts!
We provide general PROFIBUS and PROFINET training – both certified and un-certified. Our most popular courses are our 2 day PROFIBUS or PROFINET Troubleshooting and Maintenance course. These courses are aimed at maintenance people. We have scheduled classes and are also available for on-site training as well.
We also provide general network consulting.
Training Classes:- Certified PROFINET Network Engineering class
- Certified PROFIBUS DP and PA Network Engineering class
- 2 day PROFINET Troubleshooting and Maintenance class
- 2 day PROFIBUS Troubleshooting and Maintenance class
Seminar:
How to have a successful PROFIBUS and PROFINET project
For a full schedule of our training and seminars please see www.jcomautomation.ca/training/ -
LOGITEK S.A.
Fernando Conde
Ctra. Sant Cugat 63 B.
08191 Rubi
Spain
Phone: +34 93 5886767
Fax: +34 93 6974182
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
-
Manchester Metropolitan University
Faculty of Science & Engineering, Mrs. Xiu Ji
John Dalton Building
M1 5GD Manchester
United Kingdom
Phone: +44 (0)161 247 6273
Fax: +44 (0)161 247 6326
Email: x.ji(at)mmu.ac(dot)uk
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
-
PHOENIX CONTACT Competence Center
Wolfgang Reich
Dringenauer Straße 30
31812 Bad Pyrmont
Germany
Phone: +49-5281-946-2157
Fax: +49-5281-946-2199
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
-
PROCENTEC BV
Mr. Fedor Meyer
Vlasmarkt 1
3011 PW Rotterdam
Netherlands
Phone: +31-174-671800
Email: training(at)procentec(dot)com
Web: www.procentec.com
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
PROCENTEC is an independant company, that concentrates all its products and services on PROFIBUS and PROFINET technology. Our main business is the export of products and the world wide support of end-users.
The technology and innovative solutions offered by our diverse business portfolio enable our customers to successfully participate in the world of Industrial Automation. We take pride in possessing in-depth knowledge of fieldbus requirements in Factory and Process automation and the expertise to create innovative solutions for these areas.
PROCENTEC is very successful with its training program. Up to now, more than 4,000 trainees have received a certificate. The costs incurred for engineering, assembly, commissioning and maintenance always play a key role when choosing a fieldbus. We train our attendees that the implementation of PROFIBUS can help to cut costs in all areas. Our practical experience is the key factor!
"We are a specialist when it comes down to complete solutions with PROFIBUS and PROFINET." -
PROCENTEC GmbH
Nico Maier
Rittnertstraße 19
76227 Karlsruhe
Germany
Phone: +49 721-831663-02
Email: nmaier(at)procentec(dot)de
Web: www.procentec.de
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
Trainings:
Training courses that cover the scope of PROCENTEC are organized at least 5 times per year in our office in Karlsruhe and on-site. For detailed information and dates please check our website www.procentec.de. -
Profi Interface Center - PIC -
Torsten Paulsen
One Internet Plaza
37604 Johnson City, TN
United States
Phone: +1 423 262-2576
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
The PROFI Interface Center (PIC), in conjunction with PI North America, offers Certified Network Engineer and Installer Classes in Johnson City, TN since 1999. Students successfully passing both the theoretical and practical tests at the end of the certified course will receive a Certificate and are eligible to be listed on the PI website as a Certified Network Engineer and Installer. These comprehensive multi-day programs provide deep insight into the workings of PROFINET or PROFIBUS.
For more information, please contact the PROFI Interface Center or email CertifiedTrainingManager(at)pinorthamerica(dot)com at PI North America.
Further details about the classes can be found here:
https://us.profinet.com/training/classroom-training/ -
PROFIBUS Ireland
Dr. Hassan Kaghazchi
Pars House, Mountshannon Raod, Lisnagry
V94Y3K0 Limerick
Ireland
Phone: +35 361 240240
Fax:
Email: info(at)profibus(dot)ie
Web: www.profibus.ie
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
-
RP Ingenieria Limitada
Rodrigo Pinto Cardenas
Tucapel 91 Of. 52
Concepción
Chile
Phone: 0056 41 2522592
Fax: 0056 41 2522592
Email: rodrigopinto(at)rpingenieria(dot)com
Web: www.rpingenieria.com
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
-
SITRAIN Training Academy Mannheim, RC-DE DI CS TA 2
Maria Sainz
Dynamostraße 4
68165 Mannheim
Germany
Phone: +49 621 17232409
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
-
Softing Industrial Automation GmbH
Stefan Krimmer
Richard-Reitzner-Allee 6
85540 Haar
Germany
Phone: +49-89-4 56 56-337
Fax: +49-89-4 56 56-488
Email: picc(at)softing(dot)com
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer
Profile
Softing offers PROFIBUS trainings.
A technology by itself does not yet present a feasible automation solution. Thats why we want to provide automation engineers with knowledge to find concrete solutions to practical issues. The structure of the Softing training courses aims at the typical demand of the different target groups - people involved in decision-making and in practical use. To optimally take into account the different requirements and starting positions, Softing offers courses with different concepts:- basic seminars providing a general overview of a technology or product
- specific advanced seminars for experts in all the different fields
- customized seminars ? even down to project support.
Our lecturers present knowledge that reflects their thorough experience and expertise. It gives you an immediate advantage in your project work.
Apart from presenting knowledge, another important part of the seminar is to provide practical experience. Therefore we limit the number of participants to 6-8 persons.
Topics, locations and dates, you can find on our website.Available Instructors:
- Stefan Krimmer
- Ulrich Decher
-
WESTCON Instrumentacao Industrial Ltda
Erik Maran
Rua Alvaro Rodrigues, 257
04582-000 Sao Paulo - SP
Brazil
Phone: +55 11 5561-7488
Fax: +55 11 5093-2292
Email: erik(at)wii(dot)com(dot)br
Web: www.wii.com.br
Certified for these Competence Areas
- Certified PROFIBUS Engineer
- Certified PROFIBUS Installer
- Certified PROFIBUS Designer
- Certified PROFIBUS PA Engineer
- Certified PROFINET Engineer
- Certified PROFINET Installer