Skip to main content

TCI - Tool Calling Interface

PROFIBUS , PROFINET

Description:
For Integration of PROFIBUS DP-Slaves and PROFINET IO-Devices in an engineering system, GSD files are used which must be provided by the device manufacturer. Syntax and semantics of these files are standardized so that the devices can be integrated independently of the manufacturer.

Besides this method, it is required for some equipment to provide a separate tool for parameter setting and diagnostics if the requirements for data input or visualization go beyond the scope of GSD means.

Today between these two methods no correlation exists so that the user of the Engineering System is faced with the following problems:
· He must have knowledge which tool is required for a particular device
· He has to enter the communication parameter of the device both in the engineering system and in the device specific tool and make sure to keep the parameter consistent.
· He must take care that both, engineering system and device specific tool, uses the same location for data storage because otherwise it will be difficult to archive the project data.

From the device manufacturer point of view, the following problems must be solved:
· He has to implement the communication functionality for each supported field bus system.
· A communication relation cannot be established by the tool if the target device is located in a different network and only a proprietary gateway interconnects the networks.

In order to fix these problems, a relation between the GSD based engineering system and the device specific tool is needed. This relation should cause only minimal dependencies between the involved tools – an easy version handling is required to ensure the interaction between different versions of the interface.

This interface is defined as “TCI- Tool Calling Interface” in this document which covers PROFINET IO, and PROFIBUS-DP. The fieldbus specific parts are described in separate documents. See corresponding annex.

Details:
Version: 1.1
Order No.: 2.602 / 2.612 / 2.622 / 7.602
Language: English


Files:
This area is for members only. Please login to access this download.
# Date Filename Type Size
26/04/2009 TCI-2602-7602_V11_Oct08.zip zip 2 MB

Our well-known PI technologies

PROFIBUS is a standardized, open, digital communications system for all areas of application in manufacturing and process automation.
PROFINET is the innovative open standard for Industrial Ethernet. It satisfies all requirements of automation technology.
IO-LINK is an independent sensor / actuator interface solution for use with with all automation technologies.