Back by popular demand, this free-to-attend seminar addresses the key practical issues arising from the use of digital communications technologies in automated manufacturing and process industry applications.
Covering the use of PROFIBUS, PROFINET and IO-Link in key application areas such as pulp & paper, chemical, utilities, pharmaceutical, packaging, printing, electrical and electronics assembly, robotics, automotive engineering, mechanical handling and logistics, control systems and energy management, it focuses on the practical aspects of using advanced network technologies from system design and safety considerations through to maintenance and fault-finding.
Supported by demonstrations of actual tools used in configuration and maintenance, the seminar will be of great value to Designers, Production/System Engineers, Instrument Technicians/Engineers and C&I Engineers involved in design, operation and maintenance of modern automated factories and process plant.
Standardised in IEC 61158, PROFIBUS and PROFINET provide state of the art digital communications addressing all the needs of manufacturing and process industries, significantly lowering capital expenditure on installation, commissioning and maintenance. They offer unprecedented integration of automation, control, monitoring and safety systems using standardised and widely supported communications and networking solutions.
IO-LINK is an independent sensor/actuator interface solution for use with several industrial fieldbus and industrial network solutions, including PROFIBUS and PROFINET. The presentation will provide an introduction to this technology, the types of devices available, how they are parameterised and how they are integrated within a programmable control system.
This seminar is ably presented by network specialists from PI UK member companies. Attendance is free of charge to pre-registered delegates from the User community, i.e. companies that own, operate, design, build or maintain automated plant. The event will provide delegates with an excellent networking opportunity and the ability to speak to our experts whom, we promise, will not force you to buy anything.
“Very well presented and a lot of useful information” “Fantastic as always and very informative”
“Superb day for experience and information”
If you’d like to learn how to simplify your PROFIBUS, PROFINET or IO-Link application … don’t miss this one-day Seminar!
Draft Agenda (Registration and Coffee 9.00 am)
Coffee and Registration
Introduction of Exhibitor stands and Profibus & Profinet Update
Profibus DP - Monitoring and Maintenance
Identifying potential future problems, diagnosing current problems and the steps to take to make your network fit for the future.
Why you should measure shield currents in PROFIBUS and PROFINET networks
Recently, a new phenomenon has appeared during the search for the causes of network failures. It has been noted data communication issues are becoming more frequent in situations where conventional network analysers do not reveal any weak points.
It was the investigation of shield currents on industrial data communication lines that prompted the usual diagnostic approach to take a completely new turn. It soon became clear that the bus itself was in perfect condition, but was being affected by external influences that are generally referred to as “EMC interference“. Further extensive measurements, both in the bonding system and in the shielding connections of bus lines, revealed an association between high leakage currents (mostly of higher frequency) and bus failures.
This presentation will explain the theory behind the measurements, the tools used to perform them and will provide limits against which all industrial networks should be checked against.
Safety for Automation and Control Networks
This presentation will discuss the basics of how we should approach a safety-related control project and discuss how networking supports the implementation of the safety system using PROFIsafe as an example of a black channel safety-related control solution.
PROFINET System Design
It is widely accepted that the most important decisions are made at design stage of a project. This presentation examines the fundamental principles of good network design for PROFINET systems, although many of the ideas are applicable to PROFIBUS and other networking systems. The presentation will discuss the main factors that must be considered at the design stage of an automation system. Practical examples will show how facilities for health checking, fault-finding and maintenance can have a crucial impact on plant availability. The presentation will also examine how properly thought out network monitoring and redundancy can drastically affect plant up-time and thus profitability.
PROFIBUS system engineering and monitoring
This presentation will look at the tools and techniques that are available for engineering activities such as health checking and fault finding. In particular the presentation will explore some of the devices that are now available for automated network condition monitoring. These devices can provide 24/7 remote monitoring of your networks to provide rapid reporting of network problems and provide indication of performance degradation and give pre-warning of impending failure. The presentation will include a practical demonstration of some of the available tools.
PROFINET for IoT, IIoT and Industry 4.0
A short journey to explain the IoT The Internet of Things, IIoT The Industrial Internet of things, IND4.0 from IND1.0 and Big Data. How PROFINET is placed as the ideal Industrial Fieldbus to fulfil the above, how its implemented and why you should consider it. Some of the myths explained.
Introduction to IO-Link – Features and Benefits
With an installed base approaching 4 million nodes IO-Link is THE protocol for communication down to the sensor and actuator level. This presentation will be covering what a typical IO-Link solution consists of, how it interfaces to the control system and the benefits that can be derived from this increased level of communication with IO-Link devices. These include: easier handling of measurement signals, remote and automatic device parameterisation, smart sensor diagnostic functions, safety over IO-Link whilst also being an enabler for Industrial IoT and Industry 4.0 strategies.
Please note that the agenda can be flexible on the day and the presenters are happy to dwell on areas of specific interest. Questions are encouraged throughout the day. All times are approximate.