Mail
MODBUS Technology Training
Endress+Hauser Switzerland
09.03.2017, 06.12.2017
Training
Switzerland

Course Content 
This 1-day course provides a basic understanding of
Modbus technology for the process automation industry. During the
training the typicall installations of Modbus RTU, ASCI and Modbus over
TCP will be discussed as well as the principal of the communication
itself. In practical examples the participants will wire up and
establish Modbus segments, with the relation to the typical uscases of a
Modbus in the Process Automation.
Typicall senarios of the device integration through Modbus into control
systems or flow computers are also part of the training.

Participants
The course is designed for field service engineers and technicians. It
is mandatory that the participant bring a laptop (preferably his/her own
service laptop) to the course with the latest version of FieldCare and
complete set of the latest DTMs installed.

Learning Objectives
1. Commissioning:
• Able to wire up an individual field device to the network
• Able to configure FieldCare for MODBUS
• Able to use FieldCare to set the necessary parameters in a field
device
• Able to integrate a field device into a DCS at a basic level

2. Maintenance:
• Able to exchange a field device on a running system
• Able to make appropriate suggestions about improving a customer`s
physical layer

3. Diagnosis
• Able to troubleshoot the fieldbus physical layer using the most
important tools available on the market at the time of the course
• Able to troubleshoot the communication layer using the most important
tools available on the market at the time of the course

Speakers 
PC Process Solutions specialists, service technicians
and product managers

Methodology
This course consists of both theoretical and hands-on exercises to
ensure that the training objectives are met. The hands-on part is over
50% of the course. There will be a theoretical and practical assessment
as part of the course. Participants must achieve a passing grade of 70%
to qualify for certification. Certification of this course - in addition
to field experience - will allow the participant to achieve the
following qualification:

- Basic MODBUS -

Fee
Per person: 350,- EUR / 350,- CHF. Includes Lunch, break refreshments and one evening event.

Training dates

19.-23.06.17     Certified PROFIBUS PA Engineer (EN) SINGAPORE
04.-05.07.17     Advanced Industrial EtherNet (EN) CH
12.-14.07.17     Technology Training PROFIBUS DP/ PA (EN) CH
17.-19.07.17     Technology Training FOUNDATION Fieldbus (EN) CH
07.08.17           Technology Training HART (EN) CH
08.-09.08.17     Technology Training WirelessHART (EN) CH
22.-25.08.17     Certified Training for PROFIBUS PA Engineer (EN) SINGAPORE
10.-11.10.17     Certified Training for PROFIBUS Installer
30.10.-03.11.17 Certified Training for PROFIBUS DP/ PA Engineer (EN) CH
16.-17.11.17     Industrial EtherNet Training: PROFINET (EN) CH
21.-23.11.17     Technology Training FOUNDATION Fieldbus (EN) SINGAPORE
23.-24.11.17     Industrial EtherNet Training: EtherNet/IP (EN) CH
28.11.17           Technology Training HART (EN) CH
29.-30.11.17     Technology Training WirelessHART (EN) CH
06.-08.12.17     Technology Training PROFIBUS DP/ PA (EN) CH
06.12.17           Technology Training MODBUS (DE) CH
07.-08.12.17     Basic Industrial EtherNet (EN) CH
11.-13.12.17     Technology Training FOUNDATION Fieldbus (EN) CH
11.-12.12.17     Advanced Industrial EtherNet (EN) CH



More fieldbus course offer see: www.endress.com/technology-training


Contact and registration

Mariana Rado
Endress+Hauser Process Solutions AG
Christoph Merian-Ring 12
CH-4153 Reinach
Phone: +41 61 715 73 78
E-Mail: training@solutions.endress.com

Endress+Hauser Process Solutions AG
Christoph Merian-Ring 12
4153 Reinach
Switzerland
By: Michael Ulrich