Mail
Certified PROFIBUS PA Engineer
Endress+Hauser Switzerland
08.05.2017, 31.10.2017
Training
Switzerland
PROFIBUS PA

Course Content
This is a 4-days course and provides an advanced understanding of PROFIBUS technology for the process automation industry. It covers PROFIBUS DP from the perspective of process automation and goes into the details of the PROFIBUS PA Profile specification.

Please note
This course ends with a PROFIBUS PA certiication. We offer as well a
combined PROFIUS DP/PA certified Engineer training course.

Participants
The course is designed for field service engineers/technicians as well
as planners who require the internationally recognized PROFIBUS
International certification.

Learning Objectives
1. Commissioning:
• Able to calculate a network PA
• Able to wire up an individual field device to the network
• Able to wire up a fieldbus segment to the network
• Able to assess the quality of the as-built fieldbus physical layer
• Able to configure FieldCare for use on a running system(cyclic
/acyclic requirements)
• Able to use FieldCare to set the necessary parameters in a field
device
• Able to integrate a field device into a DCS
(module/slots)

2. Maintenance:
• Able to exchange a field device on a running system without shooting
down the bus communication
• Able to make appropriate suggestions about improving a customer`s
physical layer

3. Diagnosis
• Able to troubleshoot the fieldbus physical layer using the most
important tools available on the market at the time of the course
• PROFIBUS DP protocol analyse

Content Focus
This course covers the following fieldbus technology:
4 days PROFIBUS DP and PA technology. Ends at day 5 with exam for the DP
and PA Level.

Speakers
PC Process Solutions specialists, service technicians and product
managers
 
Methodology
This course consists of both theoretical and hands-on exercises to
ensure that the training objectives are met. The hands-on part is over
50% of the course.
There will be a theoretical and practical assessment as part of the
course. Participants must achieve a passing grade to qualify for
certification. Certification of this course - in addition to field
experience - will allow the participant to achieve the following
qualification:
- Certified PROFIBUS DP and PA Engineer -

Speakers
PC Process Solutions specialists and service technicians

 

Fee
Per person: 1800,- EUR / 1800,- CHF. Includes Lunch, break refreshments and one evening event.


Training dates

17.-18.01.17  Basic Industrial Ethernet (DE)
19.-20.02.17  PROFINET Technology Training (DE)
01.02.17        HART Technology Training (DE)
02.-03.02.17  WirelessHART Technology Training (DE)
02.-03.02.17  Basic Industrial Ethernet (EN)
08.-10.02.17  PROFIBUS Technology Training (EN)
13.-14.03.17  PROFINET Technology Training (EN)
15.-16.03.17  EtherNet/IP Technology Training (EN)
03.-04.04.17  PROFINET Technology Training (DE)
05.-06.04.17  EtherNet/IP echnology Training (DE)
25.-26.04.17  Certified PB Installer (DE)
08.-11.05.17  Certified PROFIBUS PA Engineer (DE)
19.-23.06.17  Certified PROFIBUS DP/ PA Engineer (EN)
19.-23.06.17  Certified PROFIBUS PA Engineer (EN) SINGAPORE


More fieldbus course offer see:
www.endress.com/technology-training


Contact and registration:


Mariana Rado
Endress+Hauser Process Solutions AG
Christoph Merian-Ring 12
CH-4153 Reinach

Phone: +41 61 715 73 78
E-Mail:
training@solutions.endress.com

Endress+Hauser Process Solutions AG
Christoph Merian-Ring 12
4153 Reinach
Switzerland
By: Michael Ulrich