With an increasing demand from the engineers of the enterprises and thanks to several successful training activities for both PROFIBUS & PROFINET technology during the past few months, both CAMETA (China Association for Mechatronics Technology and Application and CPO (Chinese PROFIBUS User Organization) will hold another training session in Sept, 2007 for “PROFIBUS System Installation and troubleshooting”, which will be the fifth training taking place this year following the Chinese Certified PROFIBUS Training, ProfiNet Orientation Training, PROFIBUS Orientation Course and PROFIBUS Troubleshooting Course earlier this year.

8000 yuan/person including lunch and training materials

Due to the limited equipments for the training, only maximum member of 30 participants are allowed.

Project Manager, system installer, maintenance people, system designer, hardware & software engineer, sales, technical support, teacher, trainer, technical consultant, system integrator and programmer.

• Masters and slaves • Token passing • Bautrate • Addressing • DP and PA

• Impedance • Delay time • Attenuation • Skin effect • Reflections

• The technology of RS 485

• Cable specifications and variants

• Topology (cable lengths and stubs)

• DB9 and M12 connectors

• Termination

• Repeaters and DP/DP couplers

• The technology of MBP

• DP/PA couplers and links

• Cable specifications and variants

• Topology (cable lengths and stubs)

• Termination

• Handheld tools • Oscilloscopes • Analyzers

• External influences on the bus cable

• IEC 61000-5-2

• Grounding between cabinets

• High voltage cables • Ferrules • Static electricity (ESD)

• Assembling and testing cables

• Protocol analysis with the analyzer

• Signal analysis with the oscilloscope

Sept. 17-19, 2007

Theory + hands-on

8000 yuan/person including lunch and training materials

Due to the limited equipments for the training, only maximum member of 30 participants are allowed.